TA Triumph-Adler P-3525 MFP - Manual (Page 18)

Part Names and Functions
1-4
Machine
This chapter explains the names of parts of the fax device.
For the parts required when functions other than FAX are used, refer to the machine’s Operation Guide.
IMPORTANT: You cannot automatically receive a fax when the power switch is turned off.
1
2
3
4
5
1 Operation panel Perform the fax operation with this panel.
2 Power switch Press this switch to turn on the power before
performing a fax or copy operation. The
message display lights to enable operation.
3 Multi purpose
tray (MP tray) Set the paper in this tray when using a type of
paper other than the cassette (e.g., when
using special paper).
4 LINE connector Connect the modular cord for the telephone
line to this connector.
5 TEL connector When using a commercially available
telephone set, connect the modular cord to
this connector.