Epson 4SLC2-50 - Manual (Page 120)

MNP Command Summary
Command Description
\A0 Sets the MNP block size to 64 characters
\A1 Sets the MNP block size to 128 characters
\A2 Sets the MNP block size to 192 characters
\A3 Sets the MNP block size to 256 characters
\B3 Sets transmit break to 300ms
%C0 Disable data compression during MNP level 5 reliable
link connection
%C1 Enable data compression during MNP level 5 reliable
link connection
\G0 Disable modem port flow control
\G1 Enable modem port flow control
\J0 Disable speed adjust at serial port
\J1 Enable speed adjust to match serial port
\K1 Empty data buffers and immediately send a break to
the remote system
\K3 Send a break to the remote modem in sequence with
data
\K5 Send a break to the remote terminal or computer in
sequence with any data received from the serial port
\N0 Set normal mode
\N1 Set direct mode
\N2 Set reliable mode
\N3 Set auto-reliable mode
\N4 Set V.42 (LAP-M) mode
\N5 Set V.42 auto-reliable mode
\N6 Set V.42/MNP reliable mode
\N7 Set V.42/MNP auto-reliable mode
Fax/Modem B-7