Epson 4SLC2-50 - Manual (Page 99)

VGACONF command options (continued)
Option name Function
NOEXPAND Disable expand mode
CENTER Center the screen on the panel
TOP Align the screen on the top of the panel
BOTTOM Align the screen on the bottom of the panel
PANEL Switch the display to the panel
CRT Switch the display to the CRT (monitor)
SIMUL Use the panel and the CRT simultaneously
16BIT Enable 16-bit operations
NO16BIT Force 8-bit operations
INHFONT Inhibit font loading when switching display
NOI Allow font loading when switching display
FULLHGT Select full height cursor
NOFULLHGT Select normal cursor
W259 Select RGB weighting 2:5:9
W529 Select RGB weighting 5:2:9
W295 Select RGB weighting 2:9:5
W592 Select RGB weighting 5:9:2
W925 Select RGB weighting 9:2:5
W952 Select RGB weighting 9:5:2
You can abbreviate any of the VGACONF options by typing only
the first three characters of the option name. The following
examples show sample VGACONF commands:
VGACONF SIMUL
VGACONF
SIM
VGACONF PANEL NOATTREMUL NOBOLD NOEXPAND
VGACONF PAN NOA NOB NOE
VGACONF -S
VGACONF -M=4
6-8 Using the VGA Utilities