Epson 4SLC2-50 - Manual (Page 80)

Setup function keys
Key(s) Function
F1 Displays help information about the option
currently selected
F2 or F3 Reverses the color of the screen
F 5 Automatically changes all settings to their
original values before changes were made
F 6 Automatically changes all settings to their BIOS
default values
F10 Save the current values and exit
Automatically Configuring Your System
You can use the AUTO CONFIGURATION WITH BIOS DEFAULTS
option to automatically configure your system to the factory
default settings. When you select this option, the program asks
you to confirm that you want to load the defaults.
Saving Your Selections
The changes you make in the Setup program are temporary until
you save them. This is important to remember in case you change
any settings by mistake and want to return to your previous
settings.
Whenever you want to save your new settings, select the
WRITE TO CMOS AND EXIT
option. The program asks you to
confirm that you want to save the new settings and exit. Press Y
and Enter. The system restarts with the new configuration
settings.
5-4 Running Setup