Epson 4SLC2-50 - Manual (Page 82)

The options on the STANDARD CMOS SETUP screen are
described in the following table. Note that the Setup program
displays the possible settings for each option at the bottom of the
screen when the option is highlighted.
STANDARD CMOS SETUP options
Option Function
Date Sets the current system date in mm/dd/yy format
Time Sets the current system time
Daylight saving Enables or disables daylight savings
Hard disk C: type Identifies the hard disk drive installed in the
computer; this setting is accurate for the
factory-installed hard disk; do not change it
Hard disk D: type Always set to Not Installed
Floppy drive A: Identifies the diskette drive, which is 1.44MB,
3½ inch; do not change this setting
Floppy drive B: Set to Not Installed (unless you install an optional
external diskette drive)
Primary display Identifies the LCD display
Keyboard Tells the system whether or not to test the
keyboard during system setup
5-6 Running Setup