Epson 4SLC2-50 User Manual
Page 60
Advertising
2. Connect the monitor cable to the port labelled
VIDEO
on the back
of the computer.
3. If the connector has retaining screws, tighten them by hand or
with a screwdriver.
4. Connect the other end of the cable to the monitor, if it is not
already attached.
5. Connect the monitor’s power cable to a grounded (earthed)
electrical socket.
See Chapter 6 for details on using the VGACONF utility, which
allows you to change the display characteristics of your LCD
and/or external monitor.
Connecting Optional Devices 4-3
Advertising