Epson 4SLC2-50 - Manual (Page 94)

4. From the Display menu, select Other (Requires disk
provided by a hardware manufacturer) and
press Enter.
5. The program prompts you to insert your display driver diskette
into drive A.
6. Replace A: \ with C: \VGAUTILS\ as the pathname and press
Enter. The program displays a list of drivers and their
associated resolutions. For example:
Cirrus Logic VGA 800x600 (16 colors)
7. Select the display driver you want and press Enter.
8. Complete the Windows Setup.
Using the VGACONF Utility Program
Your hard disk drive includes the utility program, VGACONF.
This program is located
in
the VGAUTILS directory.
This utility allows you to change your system’s default graphic
configuration. Follow these steps to run VGACONF:
1. Log onto the C:\ VGAUTILS directory.
2. Type VGACONF and press Enter. You see this main menu:
Using the VGA Utilities 6-3