Epson 4SLC2-50 - Manual (Page 121)

MNP Command Summary (continued)
Command Description
\O Force a reliable link independent of whether or not the
modem originated or answered the call
\Q0 Disable flow control
\Q1 Enable XON/XOFF flow control
\Q2 Enable RTS/CTS flaw control
\Q3 Enable XON/XOFF software flow control
\Q4 Enable unidirectional hardware flow control, keeping
CTS off until connection is established
\Q5 Unidirectional, keep CTS off until connection
established
\Q6 Kept CTS off until connection for bidirectional
hardware flow control established
\S Display on-line modem status
\T0 Inactivity timer: Disables timer
\Tn Sets timer to number (n) up to 90 minutes
\U Accept a reliable link request independent of whether
or not the modem originated or answered the call
\ V0 Disable extended MNP and V.42 result codes
\V1 Enable extended MNP and V.42 result codes
\X0 Disable XON/XOFF pass through, but still process
\X1 Enable XON/XOFF pass through and process
\Y Establish an MNP reliable link while already connected
in direct mode
\Z Switch to direct mode
B-8 Fax/Modem