Amprobe ACD-30P Clamp-On-Power-Meters User Manual
Page 12
11
Temperature function (models ACD-31P & ACD-41PQ only)
Set the slide-switch function-selector to the
o
C/
o
F position. Default at last selected
function. Press SELECT button to toggle between
o
C and
o
F measurement functions. Be
sure to insert the banana-plug type-K temperature bead probe TPK-59 at correct
polarities.
Ω/ functions
Set the slide-switch function-selector to the
Ω/
function position. Default at last
selected function. Press SELECT button to toggle between
Ω and measurement
unctions.
f
Backlighted display (models ACD-31P & ACD-41PQ only)
ress the SELECT button for 1 second or more to toggle the display backlight on or off.
P
Auto Power Off (APO)
The meter turns off after approximately 17 minutes of neither switch nor button activity.
To wake up the meter from APO, slide the function-selector to other positions and back
on again. Always turn the function-selector to OFF when the meter is not in use.