Amprobe SOLAR-600 Solar-Analyzer - Manual (Page 31)

24
SOFTWARE INSTALLATION
Install Software
Execute Install.bat (which is in the software disc) to enter the procedures of
installing the Software. Please follow the instructions to install the Software.
During the installation, the USB driver program and the Analyzer Software will
be installed automatically.
Remark:
1. After putting the software disc into CD-ROM drive, the Software will
automatically execute the installation.
2. If the installation is not automatically executed, please choose the
Install.bat program in the software disc to perform the installation.
3. After the Software has been installed, please restart the system.
Install USB Driver
During the installation of the Software, the USB driver program will be
installed automatically.
However, if users need to install USB driver program, please choose the USB
Driver Directory in the software disc, click CP210xVCPInstaller.exe program (for
Windows Vista / XP / 2000) to execute the installation of USB Driver.
Remark:
1. If the driver program can’t detect the hardware, please remove the
hardware and then plug it in properly.