Amprobe SOLAR-600 Solar-Analyzer - Manual (Page 36)

29
Information, Parameter, Overall
A.1 Information
Display the curves and data of the measurements.
Display the starting time of recording, curves and data.
Select display modes of curves:
1. IV: only display IV curve (such like the read line).
2. P: only display W (power) curve (such like the green curve).
3. IV, P: display both IV and W (power) curves.
Curve:
users can toggle between I:V and V:I for selecting the units of Y and X
axes.
1. I:V – I for Y axis, V for X axis.
2. V:I – V for Y axis, I for X axis.
Data displayed:
When users move the mouse in the curve, the three data (V, I, W) of the
Present Sample will display. For example users can see from the above:
(here the units of Y and X axes are V:I)