PLANET FGSD-1022 - Manual (Page 6)


4. Logon to the Console
Once the terminal has connected to the device, power on the Managed Switch, the
terminal will display that it is running testing procedures.
Then, the following message asks the login user name and password. The factory
default password as following and the login screen in Figure 4-1 appears.
User name: admin
Password: admin
Figure 4-1 Managed Switch Console Login screen
Note
1. For security reason, please change and memorize the new pass-
word after this first setup.
2. Only accept command in lowercase letter under console inter-
face.