PLANET FGSW-2620VM - Manual (Page 67)

FGSW-2620VM / FGSW-2624SF User’s Manual
Object Description
802.1x Protocol Disable or enable 802.1x Protocol.
Radius Server IP Set the Radius Server IP address.
Server Port Set the UDP destination port for authentication requests to the specified Radius
Server.
Accounting Port Set the UDP destination port for accounting requests to the specified Radius
Server.
Shared Key Set an encryption key for use during authentication sessions with the specified
radius server. This key must match the encryption key used on the Radius Server.
NAS, Identifier Set the identifier for the radius client.
Apply Button Press this button to save the value on the Switch.
3. Setup the RADIUS server and assign the client IP address to the Web-Smart switch. In this case, field in the
default IP Address of the Web-Smart switch with 192.168.0.100. And also make sure the shared secret key is as
same as the one you had set at the switch RADIUS server – 12345678 at this case.
4. Configure ports attribute of 802.1X, see the next section “Per Port Status Configuration”.
67