PLANET FSD-808P - Manual (Page 13)

13
3.3 Product Application
3.3.1 Connecting end node or Switch
1. Place the FSD-808P on a smooth surface or fasten the mounting brackets
purchased separately with the provided screws in a standard 19-inch rack.
2. Connect the power cord to the power inlet socket of FSD-808P and the other
end into the local power source outlet. When the Switch receives power, the
Power LED should remain solid Green.
3. Connect other switch or PC to one port of the FSD-808P using Category 3/4/5/5e
UTP/STP cabling.
4. Connect another switch or PC to the other port of FSD-808P by following the
same process as described in Step 3.
LAN / PCs
802.3af PoE
IP Camera 802.3af PoE
VoIP Phone
N N
PoE PoE PoE PoE
Power
AC
FSD-808P
802.3af PoE
VoIP Phone 802.3af PoE
Wireless AP
10/100Base-TX Data
2.4GHz 802.11n N
Power Line (AC) AC
100Base-TX UTP
PoE 100Base-TX UTP with PoE
Figure 3-4: End node or Switch Connection
Note
Cable distance for Switch
The cable distance between the FSD-808P and PC should not
exceed 100 meter for UTP/STP cable.
Make sure the wiring is correct
It can be used Category 3/4/5 cable in 10 Mbps operation. To
reliably operate your network at 100Mbps, you must use an
Unshielded Twisted-Pair (UTP) Category 5/5e cable, or better Data
Grade cabling. While a Category 3 or 4 cables may initially seem
to work, it will soon cause data loss.