PLANET FSD-808P - Manual (Page 14)

14
3.3.2 Department / Workgroup PoE Switch
Providing 8-Port PoE in-line power interfaces, the FSD-808P can easily build a
power centrally-controlled IP phone system, IP Camera system and Wireless AP
group for the enterprise. For instance, up to 8 cameras can be installed around the
corner in the company for surveillance demands or up to 8 Wireless AP to build a
wireless roaming environment in the office. Without the power-socket limitation, the
Switch makes the installation of cameras or Wireless AP more easily and efficiently.
Uplink
FSD-808P
802.3af PoE
VoIP ATA
Power
AC
Power Line (AC) AC
100Base-T UTP
PoE 100Base-T UTP with PoE
2.4GHz 802.11n N
N N
802.3af PoE
Wireless AP
PoE PoE PoE PoE PoE
Phone 802.3af PoE
IP Camera 802.3af PoE
IP Camera 802.3af PoE
VoIP Phone
Up to 8 PoE Powerd Devices
Figure 3-5: Department / workgroup PoE Switch Connection
3.4 Power over Ethernet Powered Device
3~5 Watts
Voice over IP phones
Enterprise can install POE VoIP Phone, ATA and other Ethernet/
non-Ethernet end-devices to the central where UPS is installed
for un-interrupt power system and power control system.
6~12 Watts
Wireless LAN Access Points
Museum, Sightseeing, Airport, Hotel, Campus, Factory,
Warehouse can install the Access Point any where with no
hesitation.
10~12 Watts
IP Surveillance
Enterprise, Museum, Campus, Hospital, Bank, can install IP
Camera without limits of install location – no need electrician to
install AC sockets.
3~12 Watts
PoE Splitter
PoE Splitter split the PoE 48V DC over the Ethernet cable into
5/12V DC power output. It frees the device deployment from
restrictions due to power outlet locations, which eliminate the
costs for additional AC wiring and reduces the installation time.