PLANET FSD-808HP - Manual (Page 16)

16
3.4 Power over Ethernet Powered Device
3~5 Watts
Voice over IP phones
Enterprise can install POE VoIP Phone, ATA and other
Ethernet/non-Ethernet end-devices to the central
where UPS is installed for un-interrupt power system
and power control system.
6~12 Watts
Wireless LAN Access Points
Museum, Sightseeing, Airport, Hotel, Campus, Factory,
Warehouse can install the Access Point any where
with no hesitation.
10~12 Watts
IP Surveillance
Enterprise, Museum, Campus, Hospital, Bank, can
install IP Camera without limits of install location – no
need electrician to install AC sockets.
3~12 Watts
PoE Splitter
PoE Splitter split the PoE 48V DC over the Ethernet
cable into 5/12V DC power output. It frees the device
deployment from restrictions due to power outlet
locations, which eliminate the costs for additional AC
wiring and reduces the installation time.
30 Watts
High Power Speed Dome
This state-of-the-art design is considerable to fit in
various network environments like traffic centers,
shopping malls, railway stations, warehouses, airports,
and production facilities for the most demanding
outdoor surveillance applications- no need electrician
to install AC sockets.
Note
Since the FSD-808HP per PoE port supports 52V DC PoE power
output, please check and assure the Powered Device (PD) accept-
able DC power range is from 52V DC. Otherwise, it will damage the
Powered Device (PD).