PLANET GS-5220-16S8C - Manual (Page 13)

13
7. Saving Configuration
In the Managed Switch, the running configuration file stores in the RAM. In the
current version, the running configuration sequence of running-config can be saved
from the RAM to FLASH by executing save startup config command, so that the
running configuration sequence becomes the startup configuration file, which is
called configuration save.
To save all applied changes and set the current configuration as a startup
configuration. The startup-configuration file will be loaded automatically across a
system reboot.
1. Click System, Save Startup Config.
2. Press the “Save Configuration” button.