PLANET GS-5220-16S8C - Manual (Page 15)

15
9. Wiring DC Power Inputs

DC Power Connector
The rear panels of the GS-5220-16S8CR contain a power switch and a DC power
connector, which accepts DC power input voltage from 36V to 60V DC. Connect the
power cable to the Managed Switch at the input terminal block. The size of the two
screws in the terminal block is M3.5.
ON
OFF
DC POWER
DC Input Range
36~60V
V+
Ensure the power switch
in the
“OFF” position
before connect the DC wire.
CAUTION
Figure 9-1: Rear Panel of GS-5220-16S8CR
Warning
Before connecting the DC power cable to the input terminal block
of the GS-5220-16S8CR, ensure that the power switch is in the
“OFF” position and the DC power is OFF.
Note
The wire gauge for the terminal block should be in the range of 12
~ 24 AWG. The DC Input range is from 36V to 60V DC.