PLANET GSW-1200S - Manual (Page 31)

GSW-1200S User's Manual 25
Deleting or Modifying a VLAN:
To delete or modify a VLAN from the VLAN Table, simply highlight the
VLAN that you want to delete or modify and then press the "Enter" key. It
will take you to the Modify VLAN Menu. Please see Figure 3-13. After
making new VLAN configuration, use the <Config> function to activate
the new settings. To delete the VLAN, use the <Delete> function to
delete it.
Figure 3-13 Modify VLAN screen
3.2.8 Priority Configuration
To decide which ports get the first right to send its data, you can set the
priority for the ports. Use the Port Priority Configuration Menu to change
the values within the screen.
The priority configuration sets the port-based priority function of the
system. PLANET GSW-1200S has 4 priority queues. Each frame can
be sent via higher or lower priority queue depending on the priority
setting of it with strict mode (see the Figure 3-14) or weighted
round-robin (see the Figure 3-15).
Use the "Arrow" key to move the highlight to the selection and press the
"Space Bar" key to toggle back and forth between the options. Press
"Enter" key for confirmation.