Logon to the console – PLANET MGSW-28240F User Manual
Page 7
Advertising
7
5. Logon to the Console
Once the terminal has been connected to the device, power on the Managed
Switch and the terminal will display “running testing procedures”.
Then, the following message asks for the login use rname and password. The
factory default username and password are admin as the login screen in Figure
5-1 appears.
Username: admin
Password: admin
Figure 5-1: MGSW-28240F Managed Switch Console Login Screen
Power
Notice
1. For security reason, please change and memorize the new pass-
word after this first setup.
2. Only accept command in lowercase letter under console inter-
face.
Advertising