PLANET WGS-804HP User Manual

Act lnk 1000 act lnk poe in-use, Package contents, Hardware description

Advertising
background image

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Thank you for purchasing PLANET 8-Port 10/100/1000T
Wall Mounted Gigabit Ethernet Switch with 4-Port PoE+,
WGS-804HP. “Wall-mounted PoE Switch” mentioned
in this Guide refers to the WGS-804HP.

Open the box of the Wall-mounted PoE Switch and
carefully unpack it. The box should contain the following
items:

The Wall-mounted PoE Switch x 1

User Manual x 1

DIN-rail Kit x 1

Wall-mounted kit x 1

Magnet Kit x 1

3-pin Terminal Block Connector x 1

RJ45 Dust-proof Cap x 8

If any item is found missing or damaged, please contact
your local reseller for replacement.

2.1 Terminal Block Connector Pinouts

To install the 3-pin Terminal Block Connector on the
WGS-804HP, simply follow the following steps:

Step 1: Insert positive DC power wire into V+,

negative DC power wire into V-, and grounding
wire into Ground.

V+

V

-

Ground

Step 2: Tighten the wire-clamp screws for preventing

the wires from loosening and plug into the
wall-mounted switch.

Note

1.

The wire gauge should be in the range
from 12 to 24 AWG

2. The device must be grounding
3. The DC power input range is 48V ~ 56V DC

2.2 LED Indicators

System

LED

Color

Function

PWR

Green

Lights to indicate that the Switch has

power.

Enclosure

IP30 aluminum

Dimensions

(W x D x H)

148 x 24.2 x 134mm

Weight

510g

Power over Ethernet

PoE Standard

IEEE 802.3af / 802.3at Power over

Ethernet PSE

PoE Power

Supply Type

End-span

Power Pin

Assignment

1/2(+), 3/6(-)

PoE Power

Output

IEEE 802.3af Standard

- Per port 48V~56V DC (depending

on the power supply), 15.4 watts

(max.)

IEEE 802.3at Standard

- Per port 50V~56V DC (depending

on the power supply), 30 watts

(max.)

PoE Power

Budget

120 watts

1000 Green

Lights:

To indicate that the port is
operating at 1000Mbps.

Off:

If LNK/ACT LED is lit, it
indicates that the port is
operating at 10/100Mbps.
If LNK/ACT LED is Off, it
indicates that the port is link-
down.

PoE Power Usage (Unit: Watt)

LED

Color

Function

30

Green

Lights: To indicate the system

consumes over 30-watt PoE
power budget

60

Green

Lights: To indicate the system

consumes over 60-watt PoE
power budget

90

Green

Lights: To indicate the system

consumes over 90-watt PoE
power budget

120

Green

Lights: To indicate the system

consumes over 120-watt PoE
power budget

2. Hardware Description

The front panel of the WGS-804HP PoE Ethernet Switch
consists of 8 x Auto-Sensing 10/100/1000Mbps Ethernet
RJ45 Ports. The LED Indicators are also located on the
RJ45 ports of the PoE Ethernet Switch.

3

4

2

1

7

8

6

5

Data+ Power

Data

120

PoE Power

Usage (W)

90

60

30

PWR

8-Port Gigabit Ethernet Switch
with 4-Port PoE+

ACT

LNK

1000

ACT

LNK

PoE In-Use

Gigabit 802.3at PoE+ Port

10/100/1000Base-T RJ45 Port

Power LED

PoE Power Usage

3-pin Terminal Block

DC Plug-in

PoE 10/100/1000BASE-T interfaces

(Port-1 to Port-4)

LED

Color

Function

LNK/

ACT

Green

Lights:

To indicate the link through
that port is successfully
established.

Blink: To indicate that the switch is

actively sending or receiving
data over that port.

PoE

Orange

Lights: To indicate the port is

providing DC in-line power.

Off:

To indicate the connected
device is not a PoE Powered
Device (PD)

10/100/1000BASE-T interfaces

(Port-5 to Port-8)

LED

Color

Function

LNK/
ACT

Green

Lights:

To indicate the link through
that port is successfully
established.

Blink: To indicate that the switch is

actively sending or receiving
data over that port.

Standard Conformance

Standard

Compliance

IEEE 802.3

IEEE 802.3u

IEEE 802.3ab

IEEE 802.3x

IEEE 802.3af

IEEE 802.3at

Ethernet

Fast Ethernet

Gigabit Ethernet

Flow Control

Power over Ethernet

Power over Ethernet

Plus

Regulation

Compliance

FCC Part 15 Class A, CE

Environment

Operating

Temperature: -10 ~ 60 degrees C

Relative Humidity: 5 ~ 95%

(non-condensing)

Storage

Temperature: -20 ~ 70 degrees C

Relative Humidity: 5 ~ 95%

(non-condensing)

2.3 Product Specifications

Model

WGS-804HP

Hardware Specifications

Network

Connector

8-Port RJ45 for 10/100/1000BASE-T

PoE Inject Port 4-Port with 802.3af / 802.3at PoE

injector function

MAC Address

Table

8K MAC address table with auto

learning function

Data Buffer

64Kbytes

Switch Fabric

16Gbps

Switch

Throughput

11.9Mpps@64Bytes

Flow Control

Back pressure for half duplex. IEEE

802.3x pause frame for full duplex

Power

Requirements

48~56V DC, 3A (max.)

Power

Consumption

140 watts / 478BTU

ESD Protection 6KV DC
EFT Protection

6KV DC

Advertising