PLANET WGSW-2620HP - Manual (Page 7)

7
5. Configure IP Address
The Managed Switch is shipped with default IP address as following.
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Managed
Switch, please use the procedures as follow:
 Show the current IP address
1. On “Switch#” prompt, enter “configure”
2. On “Switch(config)#” prompt, enter “show ip”.
3. The screen displays the current IP address, Subnet Mask and Gateway. As show
in Figure 5-1.
Figure 5-1 Show IP Information Screen
 Configure IP address and Default Gateway
4. On “Switch(config)#” prompt, enter the following command and press
<Enter>. As show in Figure 5-2.
Switch(config)# ip address 192.168.1.100 255.255.255.0
Switch(Config)# ip default-gateway 192.168.1.254