PLANET ICA-3350P - Manual (Page 2)

VERIFY THE CONTENTS INSIDE THE BOX
The package should contain the items plus 3 Mega-pixel Remote Focus Bullet IR IP Camera. If any item
is missing or damaged, please contact the seller immediately.
x 3
x 3
x 2
x 1
x 1
Quick Installation Guide CD-ROM Power Adapter Desiccant Screw Packet
Step 1 : Hardware Overview
(1) (2) (3) (4) (5) (6) (7)
Interface Description
(1) RS-485 & digital I/O
RS485D+: red
RS485D-: yellow
Alarm out: green
Sensor in: blue
GND: black
(2) Power DC power input (12V, 2A), connected to AC power adapter.
(3) Reset Reset IP-cam to default setting.
(4) Audio output
Connects to external audio amplifier or speakers with built-in amplifier.
May require appropriate audio jack converter (depending on the type
of amplifier / speaker you’re using).
(5) Audio input
Connects to audio peripheral for audio input, like microphone or other
audio devices.
(6) Ethernet (POE supported)
Connects to your local area network over Ethernet cable.
Orange LED: Power on.
Green LED: Ethernet cable is connected.
(7) TV output Connects to TV
Note
Only use the power adapter packed in the package. Otherwise, the product may be
damaged.
Step 2: Installation
1. Connect Ethernet cable to IP camera and PC.
2. (Optional) Connect audio peripherals to audio in / audio out port.
3. (Optional) Connect RS-485 peripherals to RS-485 port.
4. (Optional) Connect external video devices or video monitor to video monitor out port.
5. (Optional) Connect external I/O devices to DIDO port.
6. (Optional) Remove the front cover and insert SD card. Then tighten the front cover gently.
Micro-SD slot
Note
If the housing is opened during installation, place desiccant from the package inside the
camera for avoiding humidity.
Step 3

Step 1 Step 2