PLANET ICA-3350P - Manual (Page 30)

3 Mega-pixel Remote Focus Bullet IR IP Camera
ICA-3350P
30
3.5.1 System
In this menu, you can configure basic IP camera settings like host name and time.
Host Name
Input the IP camera’s host name here; any words or characters
that will help you to identify this IP camera can be used. Or you
can use IP camera’s installation location as host name, and this
will help you to identify IP camera when you have many IP
cameras installed.
Indicator LED
The LED lights located at the cable of IP camera are on by
default. But, if you don’t want other people to know the status of
this IP camera, you can select ‘Off’ and LED lights will be
switched off.
Time Zone
Select the time zone of residence from the dropdown menu to
keep the correct date and time.
Daylight Saving
If the area you live uses daylight saving, check this box;
otherwise do not check this box to keep time correct.
Keep the Current Date
and Time
Select this option and date / time setting will not be changed
when you click ‘Apply’ on the page. You can check ‘Camera
Date and Time’ item on this page to know IP camera’s current
date and time setting.
Synchronize with
Computer Time
Select this item and IP camera will use your computer’s time as
its time.
Synchronize with NTP
Server
Select this item and IP camera will keep its date and time
setting synchronized with specified time server (NTP server).
Please input NTP server’s IP address or host name in the ‘NTP
Server Address’ field, and select time update interval from the
‘Update Interval’ dropdown menu.