Configure ip address – PLANET IGS-10020HPT User Manual
Page 8
Advertising
8
6. Configure IP address
The IGS-10020HPT Managed Industrial Switch is shipped with default IP address as
following.
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Managed
Industrial Switch, please use the procedures as follow:
Show the current IP address
1. On “IGS-10020HPT>” prompt, enter “ip” to enter IP configuration mode.
2. On “IGS-10020HPT :/IP>” prompt, enter “configuration”.
3. The screen displays the current IP address, Subnet Mask and Gateway. As show
in Figure 6-1.
Figure 6-1: Show IP information screen
Advertising