PLANET POE-150 - Manual (Page 5)

1
Chapter 1
Introduction
Thank you for purchasing our POE-150/ 150S, IEEE802.3af
Power over Ethernet Adapter. This user’s manual is to provide
the installation and usage of this adapter for network installers
and users.
The POE-150 and POE-150S is an IEEE802.3af Power over
Ethernet devices that provide 48V DC over Ethernet cables.
The POE-150 / 150S product includes are an Injector and a splitter.
An injector inserts DC Voltage into the CAT 5 cable allowing the
cable between the Injector and Splitter to transfer data and power
simultaneously. The maximum distance between the Injector and
Splitter is 100 meters.
With POE-150 installed, it is combines the Ethernet digital data
with power over the twisted pair cables as an injector. And POE-
150S, the splitter, shall separate the digital data and the power
into two outputs.
With IEEE802.3af Power over Ethernet devices installed, the
system administrator only have to use a single RJ-45 Ethernet
cable to carries both power and date to each devices. Besides, to
connect through POE-150/ 150S, you could also have following
benefit that, cost saving, ease for networking planning and higher
reliability. What’s more, upon any IEEE802.3af installed, the POE-
150 or POE-150S all can make the connection while migrating
or splitting the power and the Ethernet digital packets, such as
connecting the POE-150 to an 802.3af complied devices, AP or IP
phone; connecting the POE-150S to the 802.3af complied injector
or switches.
Providing three kind of DC output, the POE-150S shall provide DC
current at 2 A, 1.3A and 1A from model POE-150S-5V, 150S-9V
and 150S-12V.