PLANET POE-151 - Manual

– 1 – – 3 –
– 2 – – 4 –
1. Introduction
1.1 Packet Contents
Thank you for purchasing our POE-151 IEEE 802.3af Power
over Ethernet Injector, your Power over Ethernet Injector
package shall contains following contents:
Check the contents of your package for following parts:
• Power over Ethernet Injector x 1
• User's Manual x 1
• Power Adapter x 1
• Power Cord x 1
If any of these pieces are missing or damaged, please
contact your dealer immediately, if possible, retain the
carton including the original packing material, and use them
against to repack the product in case there is a need to
return it to us for repair.
1.2 Key Features
• Comply with IEEE 802.3af Power over Ethernet, IEEE
802.3/802.3u 10/100Base-TX
• Provide DC 48V power over RJ-45 Ethernet cable to
device with Ethernet port
• Auto-detect of PoE IEEE 802.3af equipment, protect
devices from being damaged by incorrect installation
• Work with EIA568, category 5, 4-pair cables for 10Base-T
or 100Base-TX
1.4 Product Outlook
LED Definition:
LED Color Function
Power Yellow
Lights to indicate that the POE-151
has power
PoE ready /
in-use
Green
Lights to indicate the port is
providing 48VDC in-line power
1.3 Specification
Model POE-151
Ethernet
Connector 2 x RJ-45
(1 for data + DC in, 1 for Data out)
Ethernet Data rate
10/100Mbps
(vary on Ethernet device attached)
Input voltage DC 48V, 0.4A
Number of device
can be powered
1
Ethernet cable TIA/EIA-568, Category 5/5e cable
LED indicator 1 x power, 1 x PoE ready / in-use
Dimension
(W x D x H)
73 x 55 x 24 mm
EMI FCC Class B, CE mark
Standard
Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3af Power over Ethernet
RJ-45 Power
Insertion Pair
Pair 4, 5, 7, 8 (Mid-Span)
2. Hardware Installation
This product provides two different running speeds –
10Mbps, 100Mbps in the same device and automatically
distin-guishes the speed of incoming connection.
This section describes the hardware features of POE-151.
Before connecting any network device to the POE-151, read
this chapter carefully.
2.1 Before Installation
Before your installation, it is recommended to check your
network environment. If there is any IEEE 802.3af devices
need to power on, the POE-151 can provide you a way
to supply power for this Ethernet device conveniently
and easily. The POE-151 equips with an AC-DC adapter
with DC 48V input and injects this DC power into the pin
of the twisted pair cable (pair 4, 5 and pair 7, 8 for Fast
Ethernet).
If there is very difficult to find a power socket for AC-DC
Adapter of your non IEEE 802.3af networked device, the
POE-151 and POE-151S can provide you a way to supply
DC power for this Ethernet device conveniently and easily.
Note
The POE-151 and POE-151S can be installed
in pair. However, the use of third-party device
is allowed if the device complied with IEEE
802.3af standard.