PLANET GT-90x Series - Manual (Page 9)

; 802.1p Tag Priority / IP address priority / IP DSCP option in Quality of Service Mode and Strict Priority /
Weighted Round Robin (WRR) QoS policies
; TS-1000 OAM / IEEE 802.3ah OAM / Loop Back Test
; 16 TCP / UDP Filter groups
; Password setting, IP setting and devices description setting through Planet Smart discovery utility
; Firmware upgrade via remote Web interface
† External DC 5V 2A power supply
† Compact in size, easy installation
† LED indicators for easy network diagnosing
† Reset Button at the front panel for resetting the factory default
† Choice of fiber-connector from SC, LC, WDM, multi-mode / single-mode fiber /1000Base-SX / LX mini GBIC
module
1.5 PRODUCT SPECIFICATION
Model GT-902 GT-902S GT-905A GT-906A15 GT-906B15
Hardware Specification
Standards
IEEE 802.3, 10Base-T
IEEE 802.3u, 100Base-TX
IEEE 802.3ab, 1000Base-T
IEEE 802.3z, 1000Base-SX/LX
Ports
1 x 10/100/1000Base-T port,
1 x 1000Base-SX/LX / LX WDM port
1 x 1000Base-SX/LX SFP slot
Copper Interface RJ-45 port (Auto-MDI/MDI-X) Twisted Pair
Optic Interface SC SFP WDM
Optic Wavelength 850nm 1310nm -
TX:1310nm
RX:1550nm
TX:1550nm
RX:1310nm
Max.
-4 dBm -3 dBm - -3 dBm +5 dBm
Launch
Power(dBm)
Min.
-9.5 dBm -9.5dBm - -9 dBm 0 dBm
Receive Sensitivity -13.5 dBm -14.4 dBm - -21 dBm -25 dBm
Maximum Input power -18 dBm -20 dBm - -3 dBm -3 dBm
Twisted-pair
10/20Mbps for Half / Full-Duplex
100/200Mbps for Half / Full-Duplex
2000Mbps for Full-Duplex
Speed
Fiber-optic 2000Mbps for Full-Duplex
Twisted-pair
10Base-T: 2-pair UTP Cat. 3,4,5, up to 100 m
100Base-TX: 2-pair UTP Cat. 5, up to 100 m
1000Base-T: 4-pair STP Cat 5 up to 100m
Cable
Fiber-optic
Cable
ƒ 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m.
ƒ 9/125μm single-mode cable, provides long distance for
10/15/20/30/40/50/70/120km (very on fiber transceiver or SFP module)
LED Indicator y PWR,
y TP LINK/ACT, 1000
y Fiber LINK/ACT
Power Consumption 3.8 Watts/ 13 BTU (maximum)
Power Input DC 5V / 2A
-4-