PLANET MC-1000R - Manual (Page 4)

4
LED indications:
Printing LED Status Description
ON The chassis is powered PWR
OFF The chassis is not powered or power failure if the
AC outlet is with 100~240V AC voltage. Please
consult your local dealer if power failure.
ON The fan is functional O.K FAN A /
FAN B
OFF The fan is not powered or it is malfunction. If the
fan LED remains off while power is on. Please
consult your local dealer to replace the FAN.
The rear panel of the MC-1000R is with two fans, one ON/OFF Switch and a
power inlet that accept 100~240V AC, 50/60Hz power input.
Fig. 2 Rear view of MC-1000R
4. Installation
4.1 Install Media Converter Chassis to 19-inch Wiring Closet Rack
» Install four screws through mounting ears into each side
» Locate Converter Chassis at 19-inch mounting rails and screw up the
front brackets
» Set Main power switch at "OFF" position before connecting the power
cord.
4.2 Install Converters to the Media Converter Chassis
Power Notice:
1. The device is a power-required device, it means, it will not work till it is
powered. If your networks should active all the time, please consider
use an UPS (Uninterrupted Power Supply) for your device. It will
prevent you from network data loss or network downtime.
2. In some area, installing a surge suppression device may also help to
protect your chassis from being damaged by unregulated surge or
current to the converter or the power adapter.