PLANET WBT-1000 - Manual (Page 8)

4
Troubleshooting
If there is no signal output, please check the following item:
1. Check whether the LED indicator on the DC injector is on. If not, it means there
is problem with the power component.
(1) Check if the power cord is correctly connected with the power adapter and
the power outlet.
(2) Check if there is electricity on power outlet.
2. Check if the radio device is working properly.
3. Check if the connection between booster and DC injector is correct, or whether
the connector is loose or not.
4. Verify if the transmit power which calculated before is correct.
5. If none of the above measures could solve the issue, please contact the supplier
for further support.