PLANET WNL-9501 User Manual
Page 2
– 5 –
– 6 –
3. Click the “setup.exe” hyperlink to initiate the install
wizard.
4. Read the License Agreement carefully. Click “Yes” to
accept it and continue.
5. It is suggested to use “WNL-9501 Utility”, which provides
fully access to all functions, to manage the WNL-9501.
Click “Next” to continue.
6. There are two installation modes you can select here:
It is recommended that you select Install Client Utilities and
Driver. Select Install Driver Only to install driver only.
After you finish the selection, please click ‘Next’ to continue.
If you see ‘Found New Hardware’ message again, please
ignore it and wait.
7. Click “Install” to begin the installation.
8. Please click “Finish” to finish the installation and please
restart your computer system.
9. The WNL-9501 utility will appear on the screen. Please
scan the Wireless Network firstly and select the AP you
would like to connect and press “Connect” button to link
it. Please click “OK” to continue.
10. After the connection is built, you can just save the
profile so that it can make the connection the next time
start up the WNL-9501 adapter.
For more information, please refer to the User’s manual in
the bundled CD.