PLANET WNL-U555HA - Manual (Page 17)

PLANET 802.11n Wireless High Power USB Adapte r
‐
17
‐
The passphrase must be identical with the setting of wireless
access point you with to connect.
Key index
Select WEP key index. For most of access points you can
select “1”, but please refer to the setting of the access point.
Network key / Confirm
network key
When the encryption type is “WPA” or “WPA2-PSK”, it’s
required to input a set of “passphrase” to connect to wireless
access point. Please input the same passphrase in two boxes
for confirmation.
EAP TYPE / Tunnel /
Provision Mode
When authentication type is any of 802.1X, you have to select
EAP type, tunnel, and provision mode from dropdown menu.
This setting must be identical with your 802.1x authentication
server.
Username / Identity /
Domain / Password
Please input 802.1x related authentication information here.
Certificate If certification is required to authenticate with 802.1x
authentication server, please select a local certificate from
dropdown list.
PAC
Check this box and PAC (Privilege Access Certificate) will be
automatically selected.
Please click “OK” when ready
.
Step 5. Wireless adapter will attempt to connect to access point; this may require few seconds to
minutes. When the “Status” become “Associated”, your computer is connected to access
point you selected. Click “Close” to close configuration window.