PLANET WNL-U555HA - Manual (Page 42)

PLANET 802.11n Wireless High Power USB Adapte r
4.1.2 Soft Access Point Security
To setup security options for Soft Access Point, configure “Wireless Network Security” as follows:
The setup items about wireless security are listed below:
Network Authentication Select network authentication mode from dropdown menu.
Data Encryption Select data encryption method from dropdown menu.
ASCII / PASSPHRASE If the encryption method is WEP, check either “ASCII” or
“PASSPHRASE” box and input it in the box as WEP passphrase.
Key Index Select WEP key index (1-4). If you don’t know which one you
should use, select 1.
Network key / Confirm
network key IF network authentication mode is WPA, please input WPA
passphrase in both box.
To save changes, click “OK”; otherwise click “Cancel” to discard changes.
‐
42
‐