PLANET HDVR-1630 - Manual (Page 42)

Hybrid Digital Video Recorder
HDVR series
42
Channel Choose the set motion detection channel.
Enable The motion detection function is on when the box is checked.
Sensitivity
Six options are provided in the sensitivity.
Only the motion detection in hybrid mode/ full
analog mode has this function of setting sensitivity,
and also only the analog channel can set region.
Region
Click the set button to enter the set area. The area is divided
into PAL 22X18. Red block means the motion is being detected
in the defensive area. White block means the unfenced area.
You can set the area as follows: Drag the mouse and draw the
area. Default: all selected blocks are detection areas.
Only the motion detection in hybrid mode/full
analog mode has this function of setting region,
and also only the analog channel can set region.
Period
Trigger the motion detection signal in the time section. You can
set by week or set uniformly. Each day is divided into four time
sections.
Interval
Only one alarm signal is turned on even there are several
motion detection signals in the set interval.
Alarm Output
Start the external equipment of corresponding linkage alarm
when the motion detection alarm is turned on.
Delay
Delay a few moments and stop when the alarm state is turned
off. The range is 10~300 seconds.
Record Channel
Choose the recording channel (multiple options supported).
Trigger the video signal when the alarm is turned on.
Tour
It means that the selected channel is single window alternate
patrol preview. The interval is set in the [Main Menu]>[System]
> [Tour].
Picture 5.5 Region