PLANET ICA-BOX30 User Manual
Page 2
Note
1. Before connecting power to IR board and
controller of heater/fan, please make sure
the power output voltage is DC 12V (max.
±10%), 1.5A.
2. Power connector information of the
controller:
7. Turn the waterproof ring tightly when the cables are
arranged properly.
8. Adjust the camera lens focus. Then push the slide
board until the camera lens pierce through the rubber
membrane on IR board. And, please let the lens as close
to the front glass as you can.
(You can find two small holes on the slide board. After
adjustment, you can use the screws included in the
package to fix the slide board on the track.)
9. Close the top cover and lock the back locker after
installing.
(You can use the gray screw included in the package to
fix the locker when everything is done.)
– 5 –
– 6 –