PLANET ICA-E3550V - Manual

B. Attach the plate to the surface using the three supplied screws.
C. Attach the bracket to the plate.
2. Install Cable Gland with RJ45 cable.
A. Disassemble the cable gland as shown below:
VERIFY THE CONTENTS INSIDE THE BOX
The package should contain the following items. If any item is missing
or damaged, please contact the seller immediately.
 Camera x 1
 Quick Installation Guide x 1
 Mounting Screw Kit x 1
 Cable Gland Package x 1
 Sunshield x 1
 Bracket x 1
 Bracket Plate x 1
1. Hardware Overview
B. Slip the clamping nut through the Ethernet cable. (Ethernet cable
is not included)
C. Wrap around the cable with the sealing insert with claw.

Note
When user closes the back cover, please make sure the
rubber seal is properly attached and the power cable is
plugged well into power cable slot.
2. Installation
Step 1: Hardware Installation
1. Install the bundled bracket
A. Mark the location of the three screw holes using the bracket plate
included in the package.