PLANET ICA-525 - Manual (Page 48)

3.6.2 PTZ Setting
PTZ Protocol Type The Network Camera is connected to built-in ICA-525 and controls this
device thru RS485 bus.
Baud Rate This is the communication speed between network module and ICA-525.
Note that please DO NOT changes the default value except on special
purpose. If so, user needs to check and set value properly for both sides
Camera ID This is the camera ID set in speed dome camera. Note that please DO
NOT changes the default value except on special purpose. If so, user
needs to check and set value properly for both sides
47