PLANET ICA-HM315W - Manual (Page 32)

4.4 Network- IP Setting
Function Explanation
IP Assignment
1. DHCP：Using DHCP, IP Camera will get all the network
parameters automatically.
2. Static IP：Please type in IP address, subnet mask, gateway, and
DNS manually.
Port Assignment
User may need to assign different port to avoid conflict when setting
up IP assignment.
1.
Web Page Port: setup web page connecting port and video
transmitting port (Default: 80)
2. RTSP Port: setup port for RTSP transmitting (Default: 554)
3. RTP Start and End Port: in RTSP mode, you may use TCP and
UDP for connecting. TCP connection uses RTSP Port (554).
UDP connection uses RTP Start and End Port.
UPnP
This IP camera supports UPnP, If this service is enabled on your
computer, the camera will automatically be detected and a new icon
will be added to “My Network Places.”
32