PLANET ICA-HM315W - Manual (Page 46)

4.14 Event- I/O Setting
PLANET IP Camera supports 1 input/ 1 output. When input is triggered, it can send the video to
some specific mail addresses, transmit the video to remote FTP server, and trigger the relay.
CATUTION!!
Please connect to propriety relay box to reduce the risk of electric shock &
damaged.
Alarm Input Setting
By GPIO I/O port input that provide related action while I/O input triggered.
GPIO Output Setting
By GPIO I/O port output that provide “On” and “Off” Switch, Slide Switch & Pan/Tilt Module for
using with relay box.
GPIO pin define please refer to the part of Front / Back plane & I/O port pin
assignment
GPIO 0
GPIO 1
ALARM INPUT
Normal: 3.3V (The voltage differential from GPIO pin & GND)
Active: 0V (GPIO 0 & GPIO1 link to PIN2 GND)
GPIO 2
GPIO 3
ALARM OUTPUT
Normal: 3.3V (The voltage differential from GPIO pin & GND)
Active: 0V (GPIO 0 & GPIO1 link to PIN2 GND)
46