PLANET NVR-1620 - Manual (Page 5)

5
HDD1/2
Green Disk is online
Red Disk error
Amber
Solid amber when NVR-420 is recording
Blinking amber when the disk is recycling
Off No disk or disk is offline
Channel 1~4
Green
Solid green when NVR-420 is online
Blinking during event triggered
Off Disconnect or no camera is configured
Connector Description
USB Connect your USB flash disk for firmware upgrade and backup
Reset Press and hold reset button for 30 seconds to factory default
HDMI HDMI output
Ethernet 10/100Mbps network
2.1.3 NVR-420 HDD Installation
1. Locate the screws highlighted below on the back of the NVR.