PLANET NVR-3210 - Manual (Page 10)

9
Connector Description
VGA VGA output
Ethernet 10/100/1000Mbps network
USB Connect your USB flash disk for firmware upgrade and backup
E-SATA External E-SATA HDD
Audio Line in/Line out/Mic
I/O DI x 8 / DO x 4
2.2.3 HDD Installation
1. Start by removing the front plate.
2. To remove the front plate, turn the tool-less screws on both sides counter-clock-
wise to loosen it from the unit. Please note the screws will still be attached to
the front plate even after the screws are completely loosened from the unit.