ProSoft Technology MVI69-ADMNET - Manual (Page 36)

Setting Up Your Development Environment MVI-ADMNET ♦ 'C' Programmable
Developer's Guide 'C' Programmable Application Development Module with Ethernet
Page 36 of 122 ProSoft Technology, Inc.
February 20, 2013
MVI46
File Name Description
AUTOEXEC.BAT Runs the executable at startup
CONFIG.SYS Loads the backplane device driver and the command interpreter
TINYCMD.COM Command interpreter
MVI46BP.EXE Backplane device driver
ADMNET46.EXE Sample application
MVI56
File Name Description
AUTOEXEC.BAT Runs the executable at startup
CONFIG.SYS Loads the backplane device driver and the command interpreter
TINYCMD.COM Command interpreter
MVI56BP.EXE Backplane device driver
MVI56DD.EXE Backplane device driver
ADMNET56.EXE Sample application
MVI69
File Name Description
AUTOEXEC.BAT Runs the executable at startup
CONFIG.SYS Loads the backplane device driver and the command interpreter
TINYCMD.COM Command interpreter
MVI69BP.EXE Backplane device driver
ADMNET69.EXE Sample application
MVI71
File Name Description
AUTOEXEC.BAT Runs the executable at startup
CONFIG.SYS Loads the backplane device driver and the command interpreter
TINYCMD.COM Command interpreter
MVI71BP.EXE Backplane device driver
ADMNET71.EXE Sample application
SETDNPSC.EXE Configures the module to use either backplane or side-connect interface.
MVI94
File Name Description
AUTOEXEC.BAT Runs the executable at startup
CONFIG.SYS Loads the backplane device driver and the command interpreter
TINYCMD.COM Command interpreter
MVI94BP.EXE Backplane device driver
ADMNET94.EXE Sample application