ProSoft Technology MVI69-ADMNET - Manual (Page 48)

Setting Up Your Development Environment MVI-ADMNET ♦ 'C' Programmable
Developer's Guide 'C' Programmable Application Development Module with Ethernet
Page 48 of 122 ProSoft Technology, Inc.
February 20, 2013
1 Change the connection settings in HyperTerminal from 19200 to 57600, and
then reconnect to the module.
2 Press [Esc] to exit the program and return to the command prompt.
Important: The autoexec.bat in the image file must allow the application to exit to a DOS prompt.