ProSoft Technology MVI56-BAS User Manual
Page 60
Using the Program Port (PRT1)
MVI56-BAS ♦ ControlLogix Platform
User Manual
BASIC Module (DB/BAS Compatible)
Page 60 of 234
ProSoft Technology, Inc.
December 13, 2011
At this point you should quickly refer to STEP 4 in order to receive the file before
the SY program timeout (about 30 seconds).
In case there are any problems during the file transmission, the message "Send
Failed" will be displayed in the screen.
Step 5
Using the menu bar in the ASCII Terminal software you are using select the
"Receive File" option. Then select the directory where you want to place the file
and select the Ymodem protocol. Then hit the receive button.
Step 6
Repeat STEPs 4 and 5 for "BATTERY.BAS" and "EPROM.BAS".
Step 7
Remove the MVI56-BAS and place the setup jumper OFF. Replace the MVI56-
BAS in the rack. Connect the ASCII cable to PRT1.