ProSoft Technology MVI56-BAS - Manual (Page 67)

MVI56-BAS ♦ ControlLogix Platform Using the Program Port (PRT1)
BASIC Module (DB/BAS Compatible) User Manual
ProSoft Technology, Inc. Page 67 of 234
December 13, 2011
71 Backplane interface failure.
72 Backplane interface failure.
73 Backplane interface failure.
74 Backplane interface failure.
75 Backplane interface failure.
76 Not enough space in EPROM.
77 No program in RAM to store.
78 No program in EPROM to erase.
79 ROM program # does not exist.
80 Cannot erase current program.
81 Too many programs stored in PROM.
82 Already executing in RAM.
83 DH485 port failed.
84 DF1 is already enabled.
85 Variable has already been DIMensioned.
86 Serial port failure.
87 DF1 transmit queue is full.
88 DF1 driver failure.
89 DF1 not enabled.
90 DF1 packet is too short.
91 DF1 driver failure.
92 DF1 driver failure.
93 DF1 driver failure.
94 DF1 Status variable not valid.
95 DF1 receive packet is too large.
96 Not legal operation when DF1 is enabled.
97 ONTIME has not been enabled.
98 Cannot IDLE inside ONTIME interrupt routine.
99 Clock has not been enabled.
100
DBY() is no longer needed nor allowed.
101 XBY() is no longer needed nor allowed.
102
No program in XRAM.
103 Domain math error (for example, sqr(-1)).
104 Singularity math error (for example, 0**(-2)).
105
Overflow.
106 Underflow.
107 Total loss of significant digits (for example, sin(10e70)).
108 Partial loss of significant digits.
109
Floating point unit stack overflow.
110 Unknown math error.
111 Divide by zero.
112
DF1 driver failure.
113
DF1 packet transmission already in process.
114 DH-485 is not enabled.
115 DH485 port failed.
116
DH485 port failed.
117 DH485 port failed.
118 Cannot mix foreground and background DF1 CALLs.
119
Cannot mix DH-485 and DF1 functions.