ProSoft Technology MVI56-BAS User Manual
Page 62
Using the Program Port (PRT1)
MVI56-BAS ♦ ControlLogix Platform
User Manual
BASIC Module (DB/BAS Compatible)
Page 62 of 234
ProSoft Technology, Inc.
December 13, 2011
[A:\]C:
[C:\]ry
At this point you should quickly refer to STEP 4 in order to receive the file before
the RY program timeout (about 30 seconds).
In case there are any problems during the file transmission, the message
"Receive Failed" will be displayed in the screen.
Step 5
Using the menu bar in the ASCII Terminal software you are using select the
"Send File" option. Then select the file and select the Ymodem protocol. Then hit
the send button.
Step 6
Repeat STEPs 4 and 5 for all three files.
Step 7
Remove the MVI56-BAS and place the setup jumper OFF. Replace the MVI56-
BAS in the rack. Connect the ASCII cable to PRT1.