ProSoft Technology MVI71-GEC - Manual (Page 42)

Diagnostics and Troubleshooting MVI71-GEC ♦ PLC 5 Platform
User Manual Generic ASCII Ethernet Communication Module
Page 42 of 86 ProSoft Technology, Inc.
May 11, 2011
Viewing Server Configuration (Servers 0 to 4)
Use commands [6] [7] [8] [9] or [0] to view the configuration of the specified
server.
Opening the Network Menu
Press [@]
to open the Network menu.
The Network menu allows you to send, receive and view the WATTCP.CFG file
that contains the IP, gateway and other network specification information. For
more information about this submenu, see Network Menu (page 42).
Exiting the Program
Press [ESC]
to restart the module and force all drivers to be loaded. The module
will use the configuration stored in the module's flash memory to configure the
module.
4.2.4 Network Menu
From the IEC-870-5-104 Server menu press [@] to display the IEC-870-5-104
Network menu screen. The Network menu allows you to send, receive, and view
the WATTCP.CFG file that contains the IP and module addresses, and other
network information.