ProSoft Technology MVI71-GEC - Manual (Page 54)

Reference MVI71-GEC ♦ PLC 5 Platform
User Manual Generic ASCII Ethernet Communication Module
Page 54 of 86 ProSoft Technology, Inc.
May 11, 2011
Object in GSCInStat Block
Offset
Start Description
Server[3].Timeout 27 This status value contains the total number of times a
connection timeout occurred on the socket.
Server[3].CfgErrWord 28 This bit mapped word defines the configuration errors for the
server.
Server[4].Enabled 29 This flag defines if the server is utilized. A value of 0
indicates the server is not used. Any other value indicates
the server is used.
Server[4].State 30 This flag defines the current state of the server.
Server[4].IP 31 This double-word value contains the IP address of the client
connected to the server.
Server[4].Port 33 This word value contains the port address for the client
connected to the server.
Server[4].Open 34 This status value contains the total number of times the
server performed an open operation.
Server[4].Established 35 This status value contains the total number of times a
connection was established on the socket.
Server[4].Closed 36 This status value contains the total number of times a close
operation was performed on the socket.
Server[4].RxCount 37 This status value contains the total number of messages
received by the server.
Server[4].RxOverflow 38 This status value contains the total number of messages
received that exceed the specified buffer size for the server.
Server[4].TxCount 39 This status value contains the total number of messages
transmitted by the server.
Server[4].TxOverflow 40 This status value contains the total number of transmit
messages that exceeded the specified maximum buffer size
for the server.
Server[4].Timeout 41 This status value contains the total number of times a
connection timeout occurred on the socket.
Server[4].CfgErrWord 42 This bit mapped word defines the configuration errors for the
server.
Reserved 43 to 62 This data area is reserved for future use.
Last Write Count 63 This word contains the number of characters written on
server from last BTR block.
If word 1 of the Input Image block is set to -3, the data for the first three clients is
passed to the processor. The format of this block is as follows:
Parameter Block Offset
Start Description
Seq Number 0 Sequence number for this block.
Server Index 1 For this status data block, this word is set to a value of -3.
PassCnt 2 Program cycle counter
Product 3 Product name as ASCII string
Rev 5 Revision level as ASCII string