ProSoft Technology 5201-DFNT-ASCII - Manual (Page 25)

Driver Status Data ASCII ♦ ProLinx Standalone
Generic ASCII Serial Communication Module
ProSoft Technology, Inc. Page 25 of 40
July 7, 2008
5 Driver Status Data
Each ASCII port associated with the ASCII driver has an associated status data
area. This data is located in the virtual address range of the module. The map
data functionality of the module must be used to map this data into the normal
data range of the module's database. The following table lists the content of the
status data areas associated with each ASCII port driver:
Port 0 Status Data
Status Register Description
13000 Receive State:
-1 = Listening for data
1 = Receiving Port Data
2 = Waiting for Backplane transfer
13001 Receive character count
13002 Receive message count
13003 Transmit State:
0 = Waiting for Data to Send
1 = RTS On
2 = RTS Timeout
3 = Sending data
4 = Waiting for RTS Off
5 = RTS turned off
30 = Intercharacter Delay
31 = Intercharacter Delay
32 = Intercharacter Delay
100 = Message Delay before Transmit
101 = Message Delay before Transmit
13004 Transmit character count
13005 Transmit message count
13006 Configuration error word
13007 to 13009 No Valid Data
Port 1 Status Data
Status Register Description
13010 Receive State:
-1 = Listening for data
1 = Receiving Port Data
2 = Waiting for Backplane transfer
13011 Receive character count
13012 Receive message count