Product installation warning – ProSoft Technology 5201-DFNT-ASCII User Manual
Page 4
ProLinx Series C (4000); ProLinx Plus (5000); ProLinx Plus with Radio
(6000)
Product Installation Warning
Power, Input and Output (I/O) wiring must be in accordance with Class 1, Division 2
wiring methods, Article 501-4 (b) of the National Electrical Code, NFPA 70 for installation
in the U.S., or as specified in Section 18-1J2 of the Canadian Electrical Code for
installations in Canada, and in accordance with the authority having jurisdiction.
A
Warning - Explosion Hazard - Substitution of components may impair suitability for
Class 1, Division 2.
B
Warning - Explosion Hazard - When in Hazardous locations, turn off power before
replacing or wiring modules.
C
Warning - Explosion Hazard - Do not disconnect equipment unless power has been
switched off or the area is known to be non-hazardous.
Your Feedback Please
We always want you to feel that you made the right decision to use our products. If you have suggestions,
comments, compliments or complaints about the product, documentation or support, please write or call us.
ProSoft Technology
1675 Chester Avenue, Fourth Floor
Bakersfield, CA 93301
+1 (661) 716-5100
+1 (661) 716-5101 (Fax)
http://www.prosoft-technology.com
Copyright © ProSoft Technology, Inc. 2000 - 2008. All Rights Reserved.
ASCII Driver Manual
July 07, 2008
PSFT.ASCII.ProLinx.UM.08.07.07
ProSoft Technology ®, ProLinx ®, inRAx ®, ProTalk® and RadioLinx ® are Registered Trademarks of
ProSoft Technology, Inc.